HC-8+ Firmware
Copyright (C) 2011-2015 EFX-TEK 

This archive contains pre-compiled production firmware for the HC-8+ controller.

-- hc-8+_production_1x10_RevE__2015-12-18.binary
-- hc-8+_production_1x10_RevF__2015-12-18.binary

It is important that you download the correct firmware to your PCB. Use Rev E
firmware for PCBs marked Rev E or lower. Use Rev F firmware for Rev F PCBs.

Updates:
-- EFX-TEK Mode
   * time-out reduced to improve responsiveness
   * added M (masked/multiple) mode to L (levels) command
     -- use mask to set any pin (even multiples) to same level
   * enhanced I (inputs) command with mode
     -- modes are "T" (TTL inputs), "D" (DMX address), "X" (XPort -- Rev F PCB)
     -- version 1.0 syntax (no mode specified) still works (returns TTL pins) 

-- DMX Mode
   * outputs refreshed 4x faster than before (now 8x per standard DMX universe period)
   * outputs can be cleared if DMX signal lost for one second or longer
     -- set A1 switch to ON to kill outputs on lost signal


To demonstrate HC-8+ features this archive also includes Prop-1 and Prop-2 test
programs:

-- hc-8+_1x10_test.bs1
-- hc-8+_1x10_test.bs2